Steam Showers, Shower Cabins, Whirlpool Baths, Bathroom Suites, Waterproof TV, Bathroom Furniture, Shower Towers, Shower Enclosures and Taps.
 

Home PageBack to Steam Showers

Clearwater Twin
Bathtek Steam Shower Cabin

The Clearwater Twin is a two person steam shower cabin with ample space inside to comfortably enjoy the showers great features. The ceiling has a monsoon rain shower that is surrounded by LED lights and also has the speaker and fan located there too. The two metal control panels each have controls for the independant body jets and hand showers. The control tower also has an electronic control pad that features a radio, mp3 connectivity, steam, fan and light controls and power.
NOTE: a very good water flow and pressure is required to allow this shower to provide desired results, this is due to the dual control syetem, unique to this model.

Bathtek Clearwater Twin Steam Room


Size: 1400mm x 900mm x 2180mm

Price £1399.99

Delivery £129.99 (see exceptions)


Order by phone, Call us on 01423 522 222

 

Learn about the benefits of Hydrotherapy

  • Remote Control
  • Electronic steam time & temperature control
  • Thermostatic Shower Valve
  • 18cm Tropical Monsoon Top Shower
  • 2 x 6 Hydro massage body jets
  • 2 x Multi function hand shower
  • Foot massage attachment
  • Built-in FM radio with cd/mp3 input
  • Pop up waste
  • Extractor Fan
  • Toiletries Shelf
  • Low Voltage Celing Lights
  • 2 x Built in seats
  • Requires between 1-3 bar of water pressure.
  • Ozone Sterilization (o3)
  • 3kw Steam generator

Monsoon Shower Fold-away-seat Glass Shelf Control Pad Control Panel Foot Massager Body Jets
Click to view larger product feature images.

Steam Shower Installation Guide

Large steam rooms allow the occupant to sit or stand at a comfortable distance from the steam outlet whilst enjoying the steam facilities. In order to offer the same steam facilities but within a smaller shower cabin footprint the location of the steam outlet pod may be close to the occupant. Care must be taken when using the steam function to avoid scalding. Children should NOT use the steam within the product unless under strict adult supervision.
Clean and Protect with Shower Guard
Package sizes:
Carton 1: 1960mm x 80mm x 370mm
Carton 2: 1450mm x 300mm x 92mm
Carton 3: 1960mm x 50mm x 870mm
Carton 4: 1950mm x 410mm x 410mm

Measurements are a guide only.
Package dimensions may change without notification.


Click here for Schematic
Your Delivery:
Your order will be supplied on a Pallet and arrive on a Tail-lift lorry. The delivery will be taken to your door or as close as is possible within access restrictions (narrow gates etc). You are required to inform us of any access restrictions that may affect deliveries to your delivery location, which would require a smaller delivery vehicle.
You are asked to check the goods upon arrival and inform us of any damage within 24 hours.

Buying Guide - Click Here

Installation Notes:
Electrical: This steam shower cabin requires 1 x 13amp electrical supply. It comes with a plug and RCD fitted, however we recommend you remove the plug and have the cabin installed to a fused spur. If you have an RCD fitted within your mains board you may also remove the RCD fitted to the unit.
Water: The Clearwater Twin cabin requires 1 x hot and 1 x cold water supply. The household water pipes should be fed to a point approximately 1 metre off the floor in the corner where the cabin is to be fitted. Balanced water pressure is required, between 2-3 bar. If using a gravity fed system you must use a pump, to provide the required water pressures. Combination (Combi) boiler may also not provide adequet water supply for this shower as it features dual control system. This shower has dual control, to achive desires results very good water flow and pressure are required. The steam cabin is a freestanding unit and as such we would recommend your fitter does not fit the unit into locations that mean the cabin cannot be moved away from the wall if needed. The couplings on the cabin to connect to your water supply are standard 15mm compression fittings.
Some of our products arrive in large boxes, please ensure that you have enough room to manoeuvre the boxes and their contents to the installation location. Please also consider the space required to construct the shower cabin needs to be sufficient to enable you to move around the whole unit during its assembly, before sliding into position.

Please also read our helpful FAQ section.

CE & ISO9001:2000
top of page
 

Pressure Equalising Valve

Click here to launch the Online Steam Shower Assembly Demonstration

Bathtek Franchise Opportunities

Download Brochure

Nationwide Fitting Service available

Click here to view the Bathtek Product Video

 
COPYRIGHT BATHTEK 2010      Terms and Conditions      Site Map             Product design and features are subject to change without notification.